Hyster turret trucks

Hyster VNA (very narrow aisle) turret trucks are used in warehouse environments where you have absolutely no room to maneuver regular sized electric pallet trucks, reach trucks.  These units contain an additional mechanism that will allow up to 90° rotation.  This helps you maneuver your loads in tight warehouse aisles.  Hyster turret lift trucks include popular model lineups  such as the V30-35ZMU.  These models use electric forklift batteries and you can purchase them with either 48v or 72v electrical systems.  On the larger V35ZMU series, they are equipped with an automatic fork centering mechanism, 13.8” x 5.5: Poly load wheels, and a 16.1” x 7.0” polyurethane forklift drive tire. 

The travel speed is 6.5 mph on the V35ZMU, and also has a maximum lifting capacity of 3500 pounds. This unit can lift your materials at a rate of 69 ft./m. and it takes approximately 118 seconds to lower your loads back down to ground level.  If you visit the official Hyster forklift website, you can find an authorized dealer locator along with PDF files which have additional specifications such as the information on the: Mast, Cab, Fork attachments, maximum lift height, tire size, etc. one of the benefits of place Hyster turret trucks is that they come with polyurethane cushion forklift wheels.  The reason these are used is because they have very low rolling resistance, and are really efficient on smooth floors. 

You should never use your electric pallet jack trucks outside however, with this type of wheel configuration.  These wheels are directly meant for indoor usage, and can get stuck or chip easily if you attempt to use them on rough surfaces.  Make sure that you inspect your machine on a daily basis, to spot any potential unsafe operating conditions.  If your wheels happen to be showing cracks or chipping make sure you purchase a new set right away.  Look inside the owners manual for your Hyster turret truck (either V30ZMU or 35 series) in order to find additional operating tips along with safety checklist procedures.  You can buy pallet jack parts directly over the Internet.  There are various aftermarket dealers which will sell and carry new, used, oem, aftermarket and refurbished parts for your Hyster turret trucks.

If you need to purchase new electric forklift batteries for your Hyster turret truck make sure that you pay attention to the minimum weight specifications.  If your replacement forklift batteries are not heavy enough, you'll need to buy a lead counterweight to balance out the center of gravity on your reach/turret truck.  Buying online is the most convenient way to get parts, as you can have them shipped right to your door. Make sure that you have the serial number and or exact OEM part number for your Hyster reach trucks so that you do not ask them to purchase the wrong parts online.